Description
GENERAL INFORMATION
HNG Series
HNG 10 / 20 / 35 / 60 / 95 / 120 / 150 / 250 / 330 / 450 / 510 / 570 / 730 / 910 / 1110 / 1230 / 1370 / 1820 / 2050 / 2950 / 3540 / 4160 / 5560 / 9170 / 11200
(Capacity 0,2Nm3/h – 2500Nm3/h; Purity 95 % – 99,999 %)
How It Works?
Pressure Swing Adsorption (PSA) type Nitrogen Generation system is used to separate and enrich Nitrogen from Oxygen employs CMS (Carbon Molecular Sieve) for adsorbent. Carbon Molecular Sieve (CMS) adsorbs Oxygen and Water Vapor molecules under certain pressure – while allowing Nitrogen to pass through.
The nitrogen molecules (4.3 Angstrom in size) passes through the column, but the oxygen molecules (3.9 Angstrom in size) are adsorbed on the carbon molecular sieve (4 Angstrom opening).
The cycle is composed of following steps
PSA Process
A. Pressurization Step:
Process to increase adsorption pressure in adsorption tower under selected operation condition.
B. Adsorption Step:
Nitrogen gas is generated under constant pressure.
C. Blow Down Step:
Restoring in the adsorption tower.
D. Purge Step:
Stage to restore the adsorption tower completely.
E. Pressure Equalization Step:
Stage in where loss can be reduced by using a part of energy to be lost.
Adsorber System
The Nitrogen Generator consists of two adsorber vessels filled with CMS, a valve assembly, air filters, main pressure regulator, and a product receiver tank. Clean and dry air is directed to one of the adsorber beds where oxygen and water vapor is adsorbed faster than nitrogen in the pore structure of the CMS, thus increasing the nitrogen purity of the product gas stream to the desired level (95 – 99.999 % as required by customer). This product flows out of the top of the adsorber bed, through the valve, and into the product receiver at a pressures lightly below the feed air pressure.
Sectoral Usage
Metal Industry
Annealing of ferrous and non-ferrous metal (Inert circumstance)
Metallurgical heat treatment (Carbonizing)
Soldering / Brazing
Plasma sheet metal cutters
Inert gas in welding process
Sintering of metal powder
Chemical Industry
Transportation of raw material in storage tank
Container ventilation and prevention of explosion inreaction tank
Sealing of nitrogen in storage tank
Cleaning tank and container
Pressure testing of pipe
Production Process And Storage Of Food
Storage of low oxygen CA or super low oxygen
Charge of nitrogen gas in packing and transportation of coffee, snack or dry nut
Purge
Diluting or transposing gas or vapor to eliminate dangerous gas and oxidized substance
Plastic
Ejecting high pressure gas (Sustaining vacuum, shortening cooling time in Ejection)
Suppressing gas generation in ejection
Charge Nitrogen Gas In Tire
Reducing noise reduction, improving fuel efficiency, reducing tire unbalance and improving driving comport
Features
Hertz Provides Necessary Nitrogen Buffer Tank As Standard!
- Simple structure, compact design, full automated operation
- 7/24 Nitrogen production in your own place
- Touch Screen PLC for controlling the complete system
- PLC Screen for Monitoring and visualization the progress
- Rapid start-up
- Safety system
- Due to well design of silencer, low noise levels during depressurization and purge
- Durable piston valves for long-life operation
- On demand production, low cost
- High performance. Design the purity and capacity of nitrogen gas meeting to customer’s requirements. (Nitrogen Purity 95 %~99.999 % is available)
- Minimum maintenance cost replace filter element periodically only and get normal service for the compressor
Optional
- Oxygen Analyzer
- Flow Meter
- Dew Point Sensor
- Nitrogen purity can be seen on screen
