Description
HIGH-SPEED CUTTING SETS
There are four HSS (high-speed steel) saws with the diameters of 120 mm and 200 mm.
PERFECT CUTTING ANGLES
The two-sided 45° angled cutting system helps cutting the lower tab of any lath, along with it.
MECHANICAL CALIPER*
This helps measuring the length and height of the lath profiles on the frame without using meters. (*Optional)
GENERAL PROPERTIES
- Cutting range +45° / -45° and intermediate degrees
- Digital wireless ruler
- Servo motor measurmenet adjusting system
- PLC controller system
- Radio frequency based wireless measurement transferring system
- Two fixed, opposed blade motors on the mobile carriage set at 45° to the workpiece support surface
- 4 cutting saw blades HSS (High Speed Steel)
- Vertical pneumatic clamping system
- Setting handle for easy mold adjustment
- Adjustable cutting speed with regulator on control panel
- Double cutting in one time
- The machine is standard equipped with completed bearing and measuring conveyors (2 + 2.4 meters long each)
- Particular care has been taken over the safety measures, both mechanical and electrical
- Power supply protects system from voltage overload
TECHNICAL SPECIFICATIONS
- Power Supply: 380-400 V, 3 ph, 50-60 Hz
- Spindle speed : 3000 rpm
- Total KW : 1,5 kW
- Air pressure : 6-8 Bar
- Air Consumption : 25 lt/min
- Machine Height : 1475 mm
- Machine Length : 5970 mm
- Machine Width : 990 mm
- Machine Weight : 140 Kg
- Saw Outside Diameter : Ø200 (Taube), Ø120 (Small Saw)
- Inside Diameter of Saw : Ø32 (Taube) Ø22 (Small Saw)
- Saw Thickness : 1,8 mm (Taube) 3 mm (Small Saw)
- Number of Teeth : 160 mm (Taube) 80 mm (Small Saw)
- Machinable Minimum Profile Length : 300 mm
- Machinable Maximum Profile Length : 2550 mm
- Maximum Profile Height : 27 mm