PRECISE CUTTING AT A HIGH SPEED
A highly-precise movement system with a servo engine ( +/- 0,1mm) offering double-side and precise cutting for aluminum profiles at any angle from 45° to 90°.
SPRAY COOLING SYSTEM
It sprays a coolant over saw as aluminum profiles are cut, making it slippery and cooled. It boosts cutting quality and prolongs the operating time of a saw.
WEDGE PROFILE CUTTING
Wedge profiles can be cut automatically in short intervals with special wedge cutting program, with the right head being operated as feeder and the left head being operated as slicer.
- The crack mill basis + the linear guides basis are machined, the crack mill and the linear guides connection holes are drilled&tapped with 5 Axis Metal Processing Center.
- Electrostatic Powder Coated Painting for all of the machine.
- Sawblade diameter 600 mm.
- Cutting heads tilting 90 degrees and 45 degrees outwards OR inwards pneumatically through a cylinder and in-between angles are adjusted manually.
- Minimum cutting length of the bottom part of the profile when the heads tilt 45 degrees outwards: 630 mm.
- Cutting width in 45 degrees: 222 mm.
- Cutting Height in 90 degrees: 325 mm.
- PLC Controller
- Movable head is moving on crack mill + linear guides with brushless servo motor.
- The height of the cut profile will be entered to the controller for the calculation of the cut size.
- Cutting list read up to 99999 profiles.
- 3,0 kW (4 Hp) 2.800 rpm motors
- Protection covers moving up and down automatically
- 2 pieces of horizontal and 1 piece vertical clamping pistons for each head.
- Hydro-Pneumatic cylinder modification fort he saw feed + Pulse spray mist coolant.
- Roller conveyor system mounted beside the movable head.
- Colored cables inside the electrical cabinet.
- Repititive cut in fixed 90 degrees with Variable or Fixed length.
- Reduced cut with pneumatic stopper.
- Automatic Extended Cut.
- Intermediate support pneumatic cylinders of 2.000 mm.
- And the protection shield with 2 sets of buttons.
- Dust trays under the machine. Complete set.
- Label Printer.
- Data transfer package for working together with ORGADATA. Importing data from LOGIKAL, barcode printing and transferring data to the CNC profile machining center through the barcode. (without the label printer)
- Automatic tilting of the heads from 22.5 to 135 degrees through servo motors and the upgraded 3 Axis CNC controller.
- Automatic cutting in different sizes and different angels with automatic feeding mechanism.
- Power Supply: 380-400 V, 3 ph, 50-60 Hz
- Spindle speed : 2800 rpm
- Total KW : 6 kW
- Air pressure : 6-8 bar
- Air Consumption : 11 lt/min
- Machine Height : 1870 mm
- Machine Length : 7200 mm
- Machine Width : 1890 mm
- Machine Weight : 1450 kg
- Saw Outside Diameter : Ø600
- Inside Diameter of Saw : Ø30
- Saw Thickness : 4 mm
- Number of Teeth : 120 -132
- Machinable Minimum Profile Length : 630 mm
- Machinable Maximum Profile Length : 5000 mm